**LIMITED TIME DEAL ON THIS ATT UVERSE APPROVED MODEM!**
 |
Setup procedure w/ CenturyLink (Also apply to most of DSL ISPs)
http://www.hiroinc.com/drivers/Technical%20Documentations/H50212%20CenturyLink%20setup.pdf
The HiRO DSL ADSL DSL2+ ADSL2+ ATT UVERESE Approved Modem 4 Port Router and 802.11 b/g/n 300Mbps 2T2R Wireless Router is a high-speed ADSL2+ WLAN and Ethernet router that is specifically designed to connect to the Internet and to directly connect to your local area network (LAN) via high-speed 10/100 Mbps Ethernet connection and/or Wireless 802.11b/g/n. The ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1.5 Mbps upstream to deliver true broadband speed and throughput.
Features & Benefits:
- Compatible with latest ADSL standards, Including DSL, ADSL, DSL2+, ADSL2+,
- Compatible with AT&T, Verizon, SBC Yahoo!! and all major DSL ISP, Tested and Verified,
- Experience the Ultra high speed 802.11n wireless connection for up to 300Mps.
- Firewall secure routing functionality gives user a safer and cleaner internet environment.
- Support WPS function, one button is all you need to connects, no more type in password.
Item is in refurbished condition with EXTENDED WARRANTY and includes everything needed for an easy installation:
• HiRO H50212 DSL2+ Modem 4 Port 11n 300M Wireless Router
• Power Supply
• Cat5e patch cord
**SAVE UP TO $600 FOR EVERY 5 YEARS YOU OWN YOUR MODEM!**
ADSL Standard
- ITU-T G.992.1(G.dmt)
- ANSI T1.413 Issue 2
- G.992.2 (G.lite)
- G.994.1 (G.hs)
- Auto-negotiating rate adaptation
- ADSL2 G.dmt.bis (G.992.3)
- ADSL2 G.lite.bis (G.992.4)
- ADSL2+ (G.992.5)
Software Features of this ATT Uverse Approved Modem
- RFC-1483/2684 LLC/VC-Mux bridged/routed mode
- RFC-1577 Classical IP over ATM
- RFC-2516 PPPoE
- RFC-2364 PPPoA
- ITU-T 1.610 F4/F5 OAM send and receive loop-back
- 802.1d Spanning-Tree Protocol
- DHCP Client/Server/Relay
- NAT
- RIP v1/v2
- DNS Relay Agent
- DMZ support
- IGMP Proxy/Snooping
- Stateful Packet Inspection
- Protection against Denial of Service attacks
- IP Packet Filtering
- QoS
- Dynamic DNS
- UPnP support
Management
- Web-based Configuration
- Menu-driven Command-line Interpreter
- Telnet Remote Management
- SNMP v1/v2/Trap
- Firmware upgrade through FTP, TFTP and HTTP
- Configuration backup/restore
- Diagnostic Tool
- TR069 supported (option)
Wireless Standard
- IEEE 802.11n Draft 2.0 (MINO 2T2R) compliance. Backwards compatible with 802.11b/g
- Support Wifi ON/OFF switch button
- Support Wifi WPS switch button
- Support 802.11n (MIMO 2T2R): Up to 300Mbps
- Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24, 18, 12, 9, and 6 Mbps
- Support 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and 1 Mbps
- Support long and short preamble modes
- Compliant transmit modulation accuracy and transmit power spectral density
- IEEE 802.11i Security Support 64/128-bits WEP, WPA, WPA2, WPS and WDS
- MAC Address Filter
- Multi-SSID
- IEEE 802.11e QoS enhancement (WMM)
Operating Frequency /Channel
- USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
- Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
- Japan 14 channels: 2.412GHz ~ 2.484GHz
Ethernet LAN Protocols /Interfaces Of this ATT Uverse Approved Modem
- Support 4 ports Ethernet Interface 10/100 Mbps auto selection which compliant with IEEE 802.3x standards
- Ethernet port Support Automatic MDI/MDI-X configuration transceiver
Hardware interface (depends of different models)
- 1 Power jack
- 1 Power switch for power on /off
- 1 Reset button for reset to factory default function
- 1 RJ11 phone jacks for ADSL connection
- Ethernet jack for LAN port connection
- Un-detachable antenna x 2 (MIMO 2T2R)
- Wifi ON/OFF button
- WPS button
- MIB II support (RFC1213)
- Transparent bridging as specified in IEEE 802.1D
- NAT (Network Address Translation)
- Dynamic Host Configuration Protocol (DHCP)
- Dynamic DNS support
- Routing Information Protocol (RIP) v1 and v2
MANAGEMENT OF THIS ATT UVERSE APPROVED MODEM
- TFTP client and server
- DHCP client and server
- FTP server and client
- Universal Plug and Play (UPnP) support
- Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
- Update of boot image or configuration data via TFTP / FTP
- Syslog
- Built-in Diagnostic Tools
- SNMP MIB support
- WIRELESS 802.11g
- Compliant 802.11g and 802.11b
- 2.4 GHz - 2.48GHz frequency range
- Supports 64 / 128 Bits WEP and WPA
- 54 Mbps wireless operation rate
- Supports Quality of Service (QoS) - 802.11e
ETHERNET INTERFACE
- IEEE 802.3
- 10/100 Mbps
- Ethernet interface supporting up to 64 LAN hosts
- ANSI T1.413 Issue 2
- G.992.2 (G.lite)
- G.994.1 (G.hs)
- Auto-negotiating rate adaptation
- ADSL2 G.dmt.bis (G.992.3)
- ADSL2 G.lite.bis (G.992.4)
- ADSL2+ (G.992.5)
Software Features of this ATT Uverse Approved Modem
- RFC-1483/2684 LLC/VC-Mux bridged/routed mode
- RFC-1577 Classical IP over ATM
- RFC-2516 PPPoE
- RFC-2364 PPPoA
- ITU-T 1.610 F4/F5 OAM send and receive loop-back
- 802.1d Spanning-Tree Protocol
- DHCP Client/Server/Relay
- NAT
- RIP v1/v2
- DNS Relay Agent
- DMZ support
- IGMP Proxy/Snooping
- Stateful Packet Inspection
- Protection against Denial of Service attacks
- IP Packet Filtering
- QoS
- Dynamic DNS
- UPnP support
Management
- Web-based Configuration
- Menu-driven Command-line Interpreter
- Telnet Remote Management
- SNMP v1/v2/Trap
- Firmware upgrade through FTP, TFTP and HTTP
- Configuration backup/restore
- Diagnostic Tool
- TR069 supported (option)
Wireless Standard
- IEEE 802.11n Draft 2.0 (MINO 2T2R) compliance. Backwards compatible with 802.11b/g
- Support Wifi ON/OFF switch button
- Support Wifi WPS switch button
- Support 802.11n (MIMO 2T2R): Up to 300Mbps
- Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24, 18, 12, 9, and 6 Mbps
- Support 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and 1 Mbps
- Support long and short preamble modes
- Compliant transmit modulation accuracy and transmit power spectral density
- IEEE 802.11i Security Support 64/128-bits WEP, WPA, WPA2, WPS and WDS
- MAC Address Filter
- Multi-SSID
- IEEE 802.11e QoS enhancement (WMM)
Operating Frequency /Channel
- USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
- Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
- Japan 14 channels: 2.412GHz ~ 2.484GHz
Ethernet LAN Protocols /Interfaces Of this ATT Uverse Approved Modem
- Support 4 ports Ethernet Interface 10/100 Mbps auto selection which compliant with IEEE 802.3x standards
- Ethernet port Support Automatic MDI/MDI-X configuration transceiver
Hardware interface (depends of different models)
- 1 Power jack
- 1 Power switch for power on /off
- 1 Reset button for reset to factory default function
- 1 RJ11 phone jacks for ADSL connection
- Ethernet jack for LAN port connection
- Un-detachable antenna x 2 (MIMO 2T2R)
- Wifi ON/OFF button
- WPS button
- MIB II support (RFC1213)
- Transparent bridging as specified in IEEE 802.1D
- NAT (Network Address Translation)
- Dynamic Host Configuration Protocol (DHCP)
- Dynamic DNS support
- Routing Information Protocol (RIP) v1 and v2
MANAGEMENT OF THIS ATT UVERSE APPROVED MODEM
- TFTP client and server
- DHCP client and server
- FTP server and client
- Universal Plug and Play (UPnP) support
- Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
- Update of boot image or configuration data via TFTP / FTP
- Syslog
- Built-in Diagnostic Tools
- SNMP MIB support
- WIRELESS 802.11g
- Compliant 802.11g and 802.11b
- 2.4 GHz - 2.48GHz frequency range
- Supports 64 / 128 Bits WEP and WPA
- 54 Mbps wireless operation rate
- Supports Quality of Service (QoS) - 802.11e
ETHERNET INTERFACE
- IEEE 802.3
- 10/100 Mbps
- Ethernet interface supporting up to 64 LAN hosts
Shipping: Can ship only within USA and Canada
Weight: 1.28 lb
BUY THIS ATT UVERSE APPROVED MODEM NOW AND NEVER PAY ANOTHER LEASE FEE AGAIN!!
*Terms and Conditions apply to the following
**SAVE UP TO $600 FOR EVERY 5 YEARS YOU OWN YOUR OWN ATT UVERSE APPROVED MODEM!**
